Industrial wireless channel measurements in a 2.4 GHz ISM radio band using a low-cost SDR-based channel sounder

Authors

  • Grzegorz Korzeniewski CUCEI, Universidad de Guadalajara, Mexico
  • Roberto Carrasco Álvarez CUCEI, Universidad de Guadalajara, Mexico

DOI:

https://doi.org/10.32870/recibe.v9i1.150

Keywords:

Channel sounding, Channel estimation, Industrial wireless channel, Multipath propagation, Software Defined Radio

Abstract

Industrial wireless channel is a challenge for the design of communication systems, due to non-Line-of-Sight transmission, caused by the presence of many highly reflective obstacles, and machines in operation, which are a source of the increased noise level. The main effect, which must be analyzed, is multipath propagation. In this article, a low-cost sounding system is proposed, based on Software Defined Radio (SDR) equipment, with the intention of making sounding devices more accessible to a larger group of researchers. Likewise, the mathematical foundations and the software/hardware implementation of the wireless channel sounding system are presented, and the solutions to mitigate the synchronization issues and SDR limitations are also introduced. The performance of the proposed sounder is validated through a measurement campaign in an industrial workshop, considering the 2.4 GHz Industrial, Scientific, Medical (ISM) band. Channel sounding measurements corroborate the accuracy of the results, which converge with the channel mathematical models proposed for several industrial environments and reported in the state-of-the-art literature. In this sense, the proposed channel sounder can be used to investigate the wireless propagation environments.

References

Al-Samman, A., Rahman, T., Hadri, M., Khan, I., & Chua, T. (2017). Experimental uwb indoor channel characterization in stationary and mobility scheme. Measurement, 111, 333–339.

Boeglen, H., Traore, A., Peinado, M. M., Lefort, R., & Vauzelle, R. (2017). An sdr based channel sounding technique for embedded systems. In 2017 11th european conference on antennas and propagation (eucap) (p. 3286-3290).

Cheffena, M. (2014, September). Industrial indoor multipath propagation — a physical-statistical approach. In Ieee 25th annual international symposium on personal, indoor, and mobile radio communication (pimrc). Washington, DC, USA.

Cheffena, M. (2016). Propagation channel characteristics of industrial wireless sensor networks. IEEE Antennas and Propagation Magazine, 58(1), 66-73.

Coll, J. (2014). Channel characterization and wireless communication performance in industrial environments (Doctoral thesis). Department of Information Technology and Communication, KTH Royal Institute of Technology, Stockholm, Sweden.

Düngen, M., Hansen, T., Croonenbroeck, R., Kays, R., Holfeld, B., Wieruch, D., & Schulze, H. (2019). Channel measurement campaigns for wireless industrial automation. Automatisierungstechnik, 67(1), 7-28.

Fliedner, N. H., Block, D., & Meier, U. (2018). A software-defined channel sounder for industrial environments with fast time variance. In 2018 15th international symposium on wireless communication systems (iswcs) (p. 1-6).

Greenstein, L., Erceg, V., Yeh, Y., & Clark, M. (1997). A new path-gain/delay-spread propagation model for digital cellular channels. IEEE Transactions on Vehicular Technology, 46(8), 477- 485.

Grzybkowski, M. J., Staniec, K., & Erlebach, K. (2006). Propagation modelling. In M. Nawrocki, M. Dohler, & A. Aghvami (Eds.), Understanding umts radio network modelling, planning and automated optimisation. theory and practice (p. 67-115). London, England: John Wiley Sons Ltd.

Hayes, M. H. (1996). Statistical digital signal processing and modeling. New York, USA: John Wiley Sons Ltd.

Hosseini, N., & Matolak, D. W. (2018). Wide band channel characterization for low altitude unmanned aerial system communication using software defined radios. In 2018 integrated communications, navigation, surveillance conference (icns) (p. 2C2-1-2C2-9).

Jamison, J., & Frolik, J. (2018). A software-defined radio approach to multi-link channel characterization. In 2018 ieee 19th wireless and microwave technology conference (wamicon)(p. 1-4).

Jeruchim, M. C., Balaban, P., & Shanmugan, K. S. (2002). Simulation of communication systems. modeling, methodology, and techniques (2nd ed.). New York, USA: Kluwer Academic Publishers.

Karedal, J., Wyne, S., Almers, P., Tufvesson, F., & Molisch, A. (2007). A measurement-based statistical model for industrial ultra-wideband channels. IEEE Transactions on Wireless Communications, 6(8), 3028-3037.

LeoBodnar. (2015). Mini precision gps reference clock [Computer software manual]. Northampshire, United Kingdom. Retrieved from http://www.leobodnar.com/

Luo, S., Polu, N., Chen, Z., & Slipp, J. (2011). Rf channel modeling of a wsn testbed for industrial environment. In 2011 ieee radio and wireless symposium (p. 87-93). Phoenix, USA.

Maas, D., Firooz, M. H., Zhang, J., Patwari, N., & Kasera, S. K. (2012). Channel sounding for the masses: Low complexity gnu 802.11b channel impulse response estimation. IEEE Transactions on Wireless Communications, 11(1), 1-8.

MacLeod, H., Loadman, C., & Chen, Z. (2005). Experimental studies of the 2.4-ghz ism wireless indoor channel. In 3rd annual communication networks and services research conference (cnsr’05). Halifax, Canada.

Miaoudakis, G. K. A., Lekkas, A., & Koubias, S. (2005). Radio channel characterization in industrial environments and spread spectrum modem performance. In Proc. of ieee etfa (p. 87-93). Catania, Italy.

Molisch, A. F. (2011). Wireless communications (2nd ed.). London, England: John Wiley Sons Ltd.

Nuand. (2014). Bladerf x40 product brief [Computer software manual]. New York, USA. Retrieved from https://www.nuand.com/bladeRF-brief.pdf

Proakis, J. G., & Manolakis, D. G. (2006). Digital signal processing (4th ed.). Madrid, Spain: Pearson Prentice Hall.

Rappaport, T. S. (2002). Wireless communications. principles and practice (2nd ed.). New York, USA: Prentice Hall.

Saleh, A. A. M., & Valenzuela, R. (1987). A statistical model for indoor multipath propagation. IEEE Transactions on Vehicular Technology, 5(2), 128-137.

Sharif, Z., & Sha’ameri, A. Z. (2007, December). The application of cross correlation technique for estimating impulse response and frequency response of wireless communication channel. In The 5 student conference on research and development –scored 2007.

Samayoa, Y., Kock, M., Blume, H., & Ostermann, J. (2018). Low-cost channel sounder design based on software-defined radio and ofdm. In 2018 ieee 88th vehicular technology conference (vtc-fall) (p. 1-5).

Stuber, G. L. (2017). Principles of mobile communication (4th ed.). Atlanta, USA: Springer International Publishing.

Syed, N. A. A., & Green, P. J. (2019). Wideband communication channel sounding for wireless industrial internet-of-things applications. In 2019 ieee vts asia pacific wireless communications symposium (apwcs) (p. 1-5).

Tse, D., & Viswanath, P. (2004). Fundamentals of wireless communication. Berkley, USA: Cambridge University Press.

Wassie, D. A., Rodriguez, I., Berardinelli, G., Tavares, F. M. L., Sorensen, T. B., & Mogensen, P. (2018, September). Radio propagation analysis of industrial scenarios within the context of ultra-reliable communication. In Proc. 87th veh. technol. conf. (vtc-spring) (p. 1-6). Porto,Portugal.

Wassie, D. A., Rodriguez, I., Berardinelli, G., Tavares, F. M. L., Sørensen, T. B., Hansen, T. L., & Mogensen, P. (2019). An agile multi-node multi-antenna wireless channel sounding system. IEEE Access, 7, 17503-17516.

Downloads

Published

2020-07-08

How to Cite

Korzeniewski, G., & Carrasco Álvarez, R. (2020). Industrial wireless channel measurements in a 2.4 GHz ISM radio band using a low-cost SDR-based channel sounder. ReCIBE, Electronic Journal of Computing, Informatics, Biomedical and Electronics, 9(1), E1–25. https://doi.org/10.32870/recibe.v9i1.150